| K Series Family is a wide range of new ‘building block’ parts. These parts provide the electrical functions that system designers most typically need, and in a format that is low cost, hermetic, and very compact.
These Building Block devices are all housed in the 14 lead K package. Each bullet below is a single Building Block part, containing multiple functions in one package :
- A combo of an adjustable positive regulator and an adjustable negative regulator
- A combo of +5V regulator with a protection diode, and XOR gates
- A combo of +5V regulator and a three-line binary decoder
- A combo of +5V regulator and 8 Bit DAC
- A current sense circuit for up to 300V use, with an internal 100 milliohm sense resistor
- A combo of multi-channel line receiver and binary decoder
- Isolated DC-DC converter from 28V aircraft power to ground-referenced +5Vout
- Isolated DC-DC converter from 28V aircraft power to ground-referenced -Vout
- +5V to GaN-capable DC-DC converter
- Switched heater controller for external heater, set by single external resistor
K Series Data Sheets
27 pg, K Series Data Sheets feature a wide range of “Building Block” devices all housed in the 14 lead K package. Rev B, 2.2MB.
|
Devices are available in tube or on tape for auto insertion.
|
|
Impellimax K Series, K1 thru K25. See Below Data Sheets for the first 25 Building Blocks. Additional K series Building Blocks are added continuously. Contact the factory with your requests.
- K1 Adjustable Positive and Adjustable Negative 1.5 Ampere Regulators with Sense Resistors (72KB) rev 1/22/13
- K2 Fixed 5V Positive 1.5 Ampere Regulator with Reverse Protection Diode and 3 X-Or Gates (78KB) rev 1/22/13
- K3 +5V Fixed 1.5 Amp Regulator, Protection Diode, and 3 input / 8 output 54F138 Binary Decoder (71KB) rev 1/22/13
- K4 +5V Fixed 1.5 Amp Regulator, Protection Diode, and 3 channels of AM26LS32 Line Receiver (73KB) rev 1/22/13
- K5 +5V Fixed 1.5 Amp Regulator, Protection Diode, and 8 bit DAC08 Digital to Analog Converter (73KB) rev 1/22/13
- K6 High Voltage (300V) Precision Current Mirror, 100 milliohm Sense resistor, and 741 Op Amp (73KB) rev 1/22/13
- K7 Isolated DC to DC Converter, Non-magnetic, Accepts 5 to 20V, floating or ground-referenced input (69KB) rev 1/22/13
- K8 SP2T PIN Switch Driver with logic threshold adjustment pin and multiple output options (75KB) rev 4/15/13
- K9 Three Channels of AM26LS32 Line Receiver, which decode into 6 outputs of a 54F138 Binary Decoder (71KB) rev 1/22/13
- K10 300V Current Mirror, with integrated 100 milliohm Sense Resistor and two center-tapped 1% 15K Resistors (76KB) rev 1/22/13
- K11 LH0041 Op-amp Buffer, High Current Output (68KB) rev 1/22/13
- K12 Very High-speed Vgate Voltage Monitor circuit, with Adjustable Over-voltage and Under-voltage Logic Outputs (69KB) rev 1/22/13
- K13 Output Buffered 1 of 8 Decoder, with kick protect diodes, for driving Relays and High Current Loads (69KB) rev 1/22/13
- K14 Isolated DC-DC Converter, No Magnetics, for use with +5V input, with 5V zener for Output Clamping (69KB) rev 1/22/13
- K15 PWM Heater Controller with internal Temperature Sense and High-Current FET output, Resistor Setpoint (71KB) rev 1/22/13
- K16 Driver for -30 to -60V GaN MMIC switches, Ultra-low power, Adjustable logic threshold (70KB) rev 1/22/13
- K17 Driver for -8 to -15V GaAs MMIC switches, Low power, Adjustable logic threshold (70KB) rev 1/22/13
- K18 Multi-function FET amplifier protector, with Logic Shutdown, Over-temp, Under- and Over- voltage, more (70KB) rev 1/22/13
- K19 High Voltage Op-amp, +/-40V output range, similar to LH0004 (70KB) rev 1/22/13
- K20 Driver for -20 to -60V GaN MMIC Switches, High Speed, Adjustable logic threshold (70KB) rev 1/22/13
- K21 Driver for -10 to -40V GaN MMIC switches, Very high speed, Adjustable logic threshold (70KB) rev 1/22/13
- K22 BIT Voltage Monitors, Six independent channels, Open collector output, Adjustable BIT threshold voltages (72KB) rev 1/22/13
- K23 Voltage multiplier, Capacitor/Diode Cascade, Times 4, up to 30V output (70KB) rev 1/22/13
- K24 GaN Bias Voltage Monitor, Requires +5V only but monitors -20 to -100V range, User set Hi and Low points (72KB) rev 1/22/13
- K25 High Voltage, Low Power GaN Negative Supply Voltage Regulator, to -75V Range (69KB) rev 1/22/13
|
